Concrete Paver Installation in Fredericksburg TX | Belgard, Keystone, Unilock, Techo-Bloc & More | Anderson Outdoor Inc.
Concrete Paver Installation in Fredericksburg and the Texas Hill Country: Brands, Products, and What to Expect
When Hill Country homeowners search for concrete paver contractors near Fredericksburg TX, they are usually surprised to discover how wide the product landscape actually is. Concrete pavers are not a single product — they are an entire category with dozens of manufacturers, hundreds of profiles, and thousands of color and texture combinations. Knowing which brands deliver real quality, and working with a contractor experienced enough to install them correctly, is the difference between a paver project that looks incredible for decades and one that starts failing within a few years.
At Anderson Outdoor Incorporated, we are Keystone Certified Paver Installers and proud to work with the industry’s most respected concrete paver brands, including Belgard, Keystone, Unilock, Techo-Bloc, and Castohn. This post walks you through what each brand offers, how concrete pavers compare to other surface options, and what the installation process looks like from a contractor who does this work every day in the Hill Country.
Why Concrete Pavers Are the Right Choice for Most Hill Country Projects
Concrete pavers are manufactured units pressed or cast from Portland cement, aggregate, and pigment. They are produced to precise tolerances, engineered for compressive strength, and available in an enormous range of sizes, textures, and colors. For driveways, patios, walkways, outdoor kitchen floors, and pool surrounds, concrete pavers deliver the right balance of durability, aesthetics, and long-term value.
Here is why they consistently outperform poured concrete slabs in our climate and terrain.
Poured concrete cracks — it is only a question of when. The Hill Country’s combination of expansive soils, caliche hardpan, limestone bedrock, and dramatic temperature swings creates ground movement that a monolithic slab cannot accommodate without cracking. Concrete pavers, because they are installed as individual interlocking units over a compacted flexible base, move with the ground rather than against it. When a unit settles, it can be releveled and reset. When a slab cracks, you are looking at a complete replacement.
Concrete pavers drain better. Properly jointed paver systems allow water to infiltrate through the joints rather than sheet across the surface. In the Hill Country, where a slow summer can be broken by three inches of rain in an afternoon, drainage performance is not a cosmetic issue — it directly impacts erosion, flooding, and structural integrity.
Concrete pavers hold their look longer. A poured slab begins to show its age within years through staining, spalling, and surface degradation. A quality concrete paver installation, sealed and maintained properly, looks better at fifteen years than most slabs do at five.
Concrete pavers add more resale value. In the premium Hill Country residential market, quality hardscape is a legitimate value driver. Buyers notice it. Appraisers recognize it. A well-executed paver driveway or patio is not a luxury — it is a smart investment in one of your largest assets.
The Brands We Install and Why We Trust Them
Not all concrete pavers are manufactured the same way. The brands we work with at AOI have earned their reputations through consistent quality, broad product selection, and the kind of technical support that helps contractors install their products correctly. Here is a breakdown of each brand we carry and what makes them worth specifying.
Belgard
Belgard is one of the most widely recognized names in the concrete paver industry and for good reason. Their product catalog covers everything from traditional tumbled and antiqued profiles to large-format contemporary slabs and permeable pavers. Belgard manufactures products designed specifically for the Southern US climate, including formulations that address high heat, UV exposure, and heavy rainfall. Their product lines give designers and homeowners an enormous range of looks within a single manufacturer’s ecosystem. For clients who want a proven product with excellent color consistency and strong installation support, Belgard is a natural first recommendation.
Keystone
Keystone built its reputation in the retaining wall world, and that foundation of structural engineering excellence carries through to their paver line. As Keystone Certified Paver Installers, our team has been trained to the standards Keystone holds their best contractors to — which means you are not just getting a Keystone product, you are getting it installed by a crew that knows exactly how that product is designed to perform. When we are building projects that integrate retaining walls, seat walls, or tiered outdoor living areas with a paved surface, Keystone’s coordinated product families make it possible to create a unified aesthetic across every surface and structure on the property. Keystone’s hardscape systems — where cap, wall block, and paver all share a consistent color palette and texture — are particularly valuable for estate-scale projects where design cohesion matters.
Unilock
Unilock is the standard-setter for premium concrete paver design in North America. Their products are engineered with proprietary technologies that deliver performance characteristics you simply cannot find in commodity paver lines. Unilock’s EnduraColor Plus technology produces colors that are fully integrated through the unit rather than surface-applied, which means the product looks the same at twenty years as it did on install day. Their premium collections are among the most specified concrete paver products in the design-build market. When a client wants to be confident they are getting the absolute best concrete paver available in terms of design and long-term appearance, Unilock is the answer.
Techo-Bloc
Techo-Bloc brings an architectural and design-forward sensibility to the concrete paver category that appeals to clients with a more modern or contemporary aesthetic vision. Their product lines feature large format options, clean linear joints, and refined surface textures that complement contemporary and transitional architecture beautifully. Techo-Bloc also manufactures a full line of coordinating wall products, steps, and coping elements, making them an excellent single-source option for projects where the outdoor environment is designed as an integrated whole.
Castohn
Castohn is a premium wet cast architectural concrete manufacturer serving the Southern US market, and one of the most impressive product lines available for projects that demand something beyond standard machine-pressed pavers. Unlike conventional concrete pavers that spend only seconds in the mold during production, Castohn’s wet cast process involves hand-crafted units that cure for hours, producing a product that is smoother, stronger, and more natural-looking than anything a high-speed machine can manufacture.
Castohn’s product line for the South includes several collections particularly well-suited to Hill Country residential design. The Mountain Slate Paver Collection captures the layered, textured appearance of natural slate in a concrete product that is far more dimensionally consistent and easier to install. The Olympic Paver series delivers a bold, classic look with exceptional strength ratings appropriate for driveway applications. The 42-inch Super Paver brings a dramatic large-format stepping stone aesthetic that works beautifully in garden paths, natural landscape transitions, and statement walkway designs. The 10 by 20 Linear Slate is a refined, contemporary profile that pairs well with modern architecture and clean-line design work. The Path and Stepping Stones collection and the Smooth Alpine Paver Collection round out a line that gives designers and homeowners an extraordinary range of options within a single manufacturer known for quality.
Castohn also manufactures complementary steps, wall and post caps, coping, and trim elements that allow us to coordinate an entire outdoor environment — from the paved surface to the seating wall cap to the stair tread — within a unified aesthetic. Every Castohn product is backed by a lifetime limited warranty, manufactured in the USA, and available with minimal lead times.
What the Right Concrete Paver Looks Like for Your Project
With this many manufacturers and product lines available, choosing the right paver starts with understanding how the surface will be used and what it needs to look like.
For driveways and heavy vehicle areas, we prioritize products with high compressive strength ratings — typically 8,000 PSI or greater — and a base system engineered for load distribution. Belgard, Keystone, and Unilock all offer products specifically rated for vehicular applications. The base preparation for a driveway is also more intensive than a pedestrian patio, with deeper excavation and thicker compacted aggregate layers.
For patios, outdoor kitchens, and entertainment areas, the design range opens up considerably. This is where Unilock’s premium profiles, Techo-Bloc’s architectural aesthetics, and Castohn’s wet cast collections shine. These surfaces receive foot traffic and occasional rolling loads from grills and furniture, but the structural demands are more forgiving, which lets us prioritize appearance.
For pools surrounds and water features, we look for products with excellent slip resistance, UV stability, and minimal moisture absorption. Belgard and Castohn both have products well-suited to wet environments, and we coordinate with pool builders to ensure the paver choice complements the pool’s finish and coping selection.
For walkways, garden paths, and stepping stone applications, we often design with a mix of products — larger format Castohn Super Pavers or Olympic units as the primary stone, with complementary smaller units or natural flagstone transitions at borders and planting beds.
What a Professional Concrete Paver Installation Looks Like
The material is only part of what you are buying when you hire a paver contractor. The installation process determines how long the finished surface performs. Here is the AOI process from start to finish.
Design and product selection. Every project begins with a site walkthrough and a design conversation. We assess grades, drainage patterns, access points, and aesthetic goals before recommending products and patterns. Our design team produces a scaled layout so you can visualize the finished product before any dirt moves.
Excavation and subgrade preparation. We excavate to the appropriate depth for the application — typically four to six inches for pedestrian areas and eight to twelve inches for vehicular applications in Hill Country conditions. All material is hauled off-site. Subgrade is graded for proper drainage slope and inspected for soft spots, rock outcrops, or problem areas before the base goes in.
Compacted aggregate base. This is the most critical phase of any paver installation. We install a compacted crushed granite or road base in lifts, each lift compacted to 98% density before the next is applied. Shortcuts in the base are the leading cause of paver failures — sinking, rocking, and drainage problems all trace back to inadequate base preparation.
Bedding layer. A one-inch screeded layer of coarse concrete sand or bedding chips is applied over the compacted base to provide a level, consistent setting bed for the pavers.
Paverinstallation and pattern layout. Units are installed per the approved design, cut to fit at borders, transitions, and curves using a combination of wet saw and splitter techniques depending on the material. We continuously check for level and joint consistency throughout installation.
Edge restraints. Mechanical edge restraints are pinned to the base along all free perimeter edges. This critical step prevents lateral migration of the paver field over time and is commonly skipped by contractors trying to cut costs.
Polymeric joint sand. After installation, polymeric joint sand is swept into all joints, activated with water, and allowed to cure. Polymeric sand resists weed germination, erosion, and ant infiltration — a significant upgrade over standard sand in any Texas installation.
Final inspection and cleanup. All debris is removed, drainage slopes are verified, and the surface is inspected before we close out the project. We walk the finished scope with the client before any final payment is collected.
How Do I Get a Price for My Paver Project?
Every concrete paver project in the Hill Country is different. Site conditions, product selection, square footage, base requirements, and scope complexity all factor into the final investment. Rather than publishing ranges that may not reflect your specific situation, we prefer to walk your property, understand what you are trying to accomplish, and put together a detailed proposal that gives you a real number with no surprises.
AOI offers client financing with flexible payment plans and competitive rates, allowing homeowners to move forward on the outdoor project they want without waiting to save the full amount upfront. Contact us to schedule your site consultation.
Who We Serve: Our Paver Installation Service Area in the Hill Country
Anderson Outdoor Incorporated is based in Fredericksburg, Texas and serves the broader Texas Hill Country. Our concrete paver installation crews regularly work in Fredericksburg, Kerrville, Boerne, Comfort, Mason, Johnson City, Marble Falls, Dripping Springs, and throughout the surrounding region. We also serve premium ranch and estate properties in gated communities and private residential developments across the Hill Country.
If you are searching for concrete paver installation near Fredericksburg TX, a Keystone Certified Paver Installer in the Texas Hill Country, a Belgard contractor near Kerrville, or a Techo-Bloc paver company in Boerne, Anderson Outdoor Incorporated is the team you are looking for.
Why AOI Is the Hill Country’s Concrete Paver Contractor of Choice
We are Keystone Certified Paver Installers. We hold a Texas General Contractor license (GC00486), carry full liability insurance and workers compensation coverage, and have the equipment and crew capacity to execute projects at any scale. Our team of trained professionals is involved in every project from proposal through closeout. When we commit to a scope, timeline, and budget, we deliver on it.
We are not a general landscape company that installs pavers as a sideline. Hardscape design and installation is a core competency of our business, and the quality of our base preparation, pattern work, and detail finishing reflects years of focused experience in this market.
We work with every major concrete paver brand and help clients make product selections based on their specific aesthetic goals, performance requirements, and budget — not on whatever we happen to have a surplus of in inventory. Our job is to find the right product for your project, install it correctly, and hand it back to you knowing it will look great and perform well for years to come.
Ready to Talk About Your Paver Project?
If you are ready to discuss a concrete paver driveway, patio, pool deck, walkway, or full outdoor living environment anywhere in the Texas Hill Country, we would love to hear about your project.
Anderson Outdoor Incorporated
1603 E Main St Unit D, Fredericksburg TX 78624
Phone: 830-998-6825
Email: info@andersonoutdoorinc.com
andersonoutdoorinc.com
Keystone Certified Paver Installers — Belgard, Keystone, Unilock, Techo-Bloc, and Castohn
Licensed Texas General Contractor GC00486
Serving Fredericksburg, Kerrville, Boerne, Comfort, Mason, Johnson City, Marble Falls, Dripping Springs, and the Texas Hill Country
